Temporal interface- SAM head- Low frequency solver
-
I am following the tutorial to apply temporal interface on SAM head.
-
When running tutorial as it is, I obtained the error below for all 4 electrodes:
-
When I started to do the example step by step, it worked but the electric field value was zero (0 V/M). Is anyone faced the same thing?
-
-
There might be some mistake you made. Can you share some more details? Which tutorial are you following? There may be a mistake in either the tutorial or in your simulation.
-
I am following the official Sim4Life tutorials, specifically Tutorial 2.12 “SAM Head with Electrodes.” Even when I run the ready-made tutorial project exactly as it comes with the software, I receive the error message “Job failed” for all electrodes. In addition, when I reconstruct the tutorial step by step myself, the simulation runs but the resulting electric field has a value of 0 V/m everywhere.
-
@SULAFA 1. As mentioned in the call since you have 1 MPI license, changing the Solver setting from automatic to manual and setting the no of parallelization process to 1 seems to solve this issue.
2. electrodes are not part of the simulation, we checked it with the voxel viewer -
@SULAFA 1. As mentioned in the call since you have 1 MPI license, changing the Solver setting from automatic to manual and setting the no of parallelization process to 1 seems to solve this issue.
2. electrodes are not part of the simulation, we checked it with the voxel viewer
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login