Problem with surface projection tool
-
Hi all,
I try to use surface projection tool refer to section 2.2.7.8, but it doesn't work out as I expected.
I uploaded my operate video about the projection of a cylinder patch on DUKE head model.
It looks like the patch imbed in the DUKE model. Maybe I lost some settings about the orientation or placement?
Thanks in advance for your help.
Sincerely yours,
Luna -
Hi Luna.
To be honest I cannot see or understand what is wrong with the projected patch.- is the volume/area of the project patch larger than the original (that happens in some situations). Unfortunately, I don't have a reliable workaround for that. In general better mesh quality (and manifold target surface) helps.
- are there gaps or overlaps between the projected cylinder and the skin?
-
Thanks for your useful suggestion!
The problem I met was that the patch partically inserted into the human head, not on the surface, shown as a more clear figure below.Both gaps and overlaps exist between the projected cylinder and the skin.
I have remeshed the human skin and the patch, to make the voxel sizes approximated match, and it worked out!
Hope this will be helpful to others with similar problem, the mesh is the crucial role.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login