Surface viewer
-
I wish to view the fields on one of the surfaces in my LF-Magneto Quasi-Static model but cannot see how to specify the surface which I am interested in. Please can you advise?
-
You could perhaps try to interpolate the fields onto the surfaces of interest. To do that, you need to drag & drop the surface (from the Multi-Tree) into the Explorer tree, while in the Analysis tab. This will create a surface object for analysis purposes, with settings such at mesh discretization (minimum edge length).
To perform the interpolation itself, select both (using the CTRL key) the E field (say) and the Surface, then click Interpolate Field in the ribbon. -
You could perhaps try to interpolate the fields onto the surfaces of interest. To do that, you need to drag & drop the surface (from the Multi-Tree) into the Explorer tree, while in the Analysis tab. This will create a surface object for analysis purposes, with settings such at mesh discretization (minimum edge length).
To perform the interpolation itself, select both (using the CTRL key) the E field (say) and the Surface, then click Interpolate Field in the ribbon.Thank you, I think that has solved my problem
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login