Creating Cross Section of Anatomy
-
You can use the planar cut tool and create slices (for 2d) or cuts. You can multiselect all tissues you are interested in, but it might take a while for yoon-sun v4 depending on the number of tissues.
-
no, actually the Planar Cut tool is in the modeler:
- Pose the model, and Clone As Static.
- Select the tissues you are interested in.
- Modify -> Planar Cut -> Planar Slice (button in the 3D view)
- Wire Tools -> Cover Loops (to create surface from closed contours)
- Tools -> Geometry (to measure area)
-
no, actually the Planar Cut tool is in the modeler:
- Pose the model, and Clone As Static.
- Select the tissues you are interested in.
- Modify -> Planar Cut -> Planar Slice (button in the 3D view)
- Wire Tools -> Cover Loops (to create surface from closed contours)
- Tools -> Geometry (to measure area)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login